Eibach 2020 Can-Am Turbo RR Pro-UTV Spring Systems

Michelle Baird | October 28, 2020

Eibach’s Pro-UTV dual-rate spring system provides smooth ride over rough terrain and prevents bottoming in G-outs for 2020 Can-Am Maverick X3 X RS Turbo RR models.

Eibach 2020 Can-Am Turbo RR Pro-UTV Spring Systems

The following is a press release from Eibach…

Can-Am’s Turbo RR comes well-equipped from the factory with Fox’s Podium RC2 remote-reservoir internal bypass shocks. With more than 22 inches of usable rear travel, [Eibach’s] team of engineers were excited to get their hands on the new RR and begin testing immediately. Throughout the development process, [Eibach’s] team found the factory-equipped springs caused an unbalanced ride creating a nervous handling during high-speed chop and through the whoops.

Working within the range of factory-equipped Fox shocks, Eibach assembled a complete plug-and-play spring system, which tackles those areas of concern. The outcome is a true dual-rate spring system with smooth ride over rough terrain and the higher additional final rate to prevent bottoming in the G-outs. You will immediately notice improved turn-in response and stay hooked to power out of the turns and deliver full confidence during high-speeds runs.

Pro-UTV Spring System for 2020 Can-Am Maverick X3 X RS Turbo RR includes four front Eibach race springs and four for the rear. (Note: Factory sliders, crossover rings/lock rings are utilized when installing this kit.)

Stage 2 Spring Kit

Perfect for the weekend warrior. Designed for 2 or 4 seat vehicles, this system delivers the confidence and control you need to keep the hammer down and lead the pack. Adjustable lockout collars allow fine tuning of the transition point of the dual spring setup-for a smooth ride over rough terrain and the higher additional rate to prevent bottoming in the g-outs. You will immediately notice better turn-in response and stay hooked-up to power out of the turns.

Stage 3 Spring Kit

Engineered for 2 or 4 seat vehicles with higher loads and additional passengers. This system offers a slightly more aggressive spring rate to maintain the balance you need at the limit. Adjustable lockout collars allow fine tuning of the transition point of the dual spring setup-for a plush ride over rough terrain and the higher additional rate to prevent bottoming. perfect for vehicles loaded with spares, tools and passengers.

2020 Can-Am Maverick X3 X RS Turbo RR Spring Kit
2020 Can-Am Maverick X3 X RS Turbo RR Spring Kit

Anti-Roll-Kit Stabilizer Bars

Complete your suspension upgrade with an Eibach Anti-Roll-Kit. Our sway bars allow critical fine-tuning of your UTV’s handling characteristics by reducing body roll through increased design stiffness over stock bars. The result: increased handling and cornering grip in any performance-driving situation.

Manufactured from cold-formed steel alloy for precision performance, and finished with a long lasting red powdercoat finish, the Anti-Roll-Kit comes complete with all mounting hardware.

Anti-Roll-Kit Stabilizer Bars include the following:

  • 20mm front solid non-adjustable stabilizer bar
  • 29mm rear tubular 2 way-adjustable stabilizer bar
  • 2 aluminum mounting brackets
  • 4 HD bushings

Note: Factory sliders, crossover rings/lock rings are utilized when installing this kit

2020 CAN-AM Maverick X3 X RS Turbo RR Anti Roll Kit
2020 CAN-AM Maverick X3 X RS Turbo RR Anti-Roll-Kit

Anti-Roll-Kit Front Adjustable End-Link System

Enhance your UTV’s handling performance with our fully adjustable Eibach End-Link Kit. These end links help improve handling performance and provide a more stable ride by minimizing swaying movements. Eibach end links are sold in pairs and feature easy to adjust hex bodies and heavy-duty Aurora rod ends.

2020 CAN-AM Maverick X3 X RS Turbo RR Anti-Roll-Kit Adjustable End Links
2020 CAN-AM Maverick X3 X RS Turbo RR Anti-Roll-Kit Adjustable End Links

Spanner Wrench Kit

ETFX2.5/ETFX3.0

Used for front (2.5″) and rear (3.0″) spring preload adjustment

ETXR2.5/ETXR3.0

Used for front (2.5″) and rear (3.0″) crossover ring adjustment

2020 CAN-AM Maverick X3 X RS Turbo RR spanner wrench

Spring Bag Kit

  • Made from Lightweight Neoprene Material
  • Eliminates Mud Packing Inside Coils
  • Keeps Spring Adjuster and Damper Shaft Clean-Extends Damper Life
  • Washable Material
  • Easy Velcro split opening for Shock & Spring Adjustment
2020 CAN-AM Maverick X3 X RS Turbo RR Spring Bags

Prices and Part Numbers:

Product Part # MSRP
Pro-UTV Front Adjustable End-Link System AK41-212-008-01-20 $168
Pro-UTV Front Anti-Roll Bar (Front Sway Bar Only) E40-212-008-01-10 $182
Pro-UTV Spanner Wrench Kit ETFX2.5 $15
Pro-UTV Spanner Wrench Kit ETFX3.0 $15
Pro-UTV Spanner Wrench Kit ETXR2.5 $15
Pro-UTV Spanner Wrench Kit ETXR3.0 $15
Pro-UTV Stage 2 Performance Spring System (Set of 8 Springs) E85-212-004-02-22 $825
Pro-UTV Stage 3 Performance Spring System (Set of 8 Springs) E85-212-004-03-22 $825
Pro-UTV Spring Bag Kit SB-212-22-24 $152

All Pro-UTV Systems are tested, developed and manufactured by Eibach in Corona, California.

For more information, visit eibach.com

Click here for more New Products on UTV News.

 

UTV News Editor